API Low Range pH Test Kit (pH 6.0-7.6)

  • In Stock

  • 0 Review(s)

Price :

৳2500

Estimated Shipping Time: Deliveries take up to 3-5 days after you place your order.

Uses: pH Test

Product SKU: tpp3763oed


API Low Range pH Test Kit (pH 6.0-7.6)

The API® pH TEST KIT monitors pH to maintain healthy freshwater conditions in your tank. pH control is imperative to prevent the harmful effects of overly alkaline or acidic aquarium water on fish and plant life, so take a few minutes each week to maintain and monitor your pH conditions with this easy-to-use kit! Tests read pH from 6.0 – 7.6, and will help you quickly and easily determine whether your levels are too high or too low.


Why Test pH?

pH is the measure of acidity of water. A pH reading of 7.0 is neutral. A pH higher than 7.0 is alkaline, and a pH lower than 7.0 is acidic. Maintaining the aquarium at the proper pH ensures optimal water quality. The pH should be tested weekly, since natural materials in the aquarium (such as fish waste and uneaten food) can cause pH changes.

Testing Tips

The minimum pH reading for this kit is 6.0 and the maximum is 7.6. Under extreme water conditions, readings below the minimum will read 6.0 and above the maximum will read 7.6. pH adjustments outside the range of this kit will not show any changes until the pH of the aquarium water is within the range of this kit. When keeping livebearers, goldfish, African Cichlids or marine fish and invertebrates use the API HIGH RANGE pH TEST KIT.

Directions

  1. To remove childproof safety cap: With one hand, push red tab left with thumb while unscrewing cap with free hand.
  2. Fill a clean test tube with 5 ml of water to be tested (to the line on the tube).
  3. Add 3 drops of pH Test Solution, holding dropper bottle upside down in a completely vertical position to assure uniformity of drops.
  4. Cap the test tube and invert tube several times to mix solution.
  5. Read the test results by comparing the color of the solution to the pH Color Card. The tube should be viewed in a well-lit area against the white area of the card. The closest match indicates the pH of the water sample. Rinse the test tube with clean water after use.

Recommended pH Levels

A pH of 7.0 is ideal when keeping a community aquarium containing a variety of tropical fish. Goldfish and livebearers prefer a pH of 7.5. Many Amazonian fish, like angelfish and neon tetras, prefer a pH of 6.5 to 6.8. Mollies and swordtails thrive at pH 7.2 to 7.5. To raise or lower the pH of a freshwater aquarium, use API pH UP® or pH DOWN®. To automatically adjust pH to a preset level, use API PROPER pH® 6.5, 7.0, or 7.5


If you'd like to know more about this chemical or need any analysis report regarding this chemical then contact us:  support@echem.com.bd.

API Low Range pH Test Kit (pH 6.0-7.6)



Contains 250 tests and includes 1 test bottle, easy-to-ready instructions, test tube and color chart

  1. pH Test Kits | Range: 6.0 – 7.6
  2. Brand: API, Made in the USA
  3. Contains 250 Tests Per Box

Ratings & Reviews

0.0

No Review Found.


To Review


To Comment