Health & Beauty
.png)
Art & Painting
Hot Deals
.png)
Glitter Paste
Price :
৳700
Estimated Shipping Time: Deliveries take up to 3-5 days after you place your order.
Product SKU: 6fa60571K1
Glitter Flakes are added to textile inks to create a shiny, glittery special effect. Mixes with most clear ink bases. Also available in a premixed version (call for details).
Available Sizes: .008″ x .008″ and .004″ x .004″
Application Tips :
Screen Preparation:
- Use a screen with a lower mesh count (e.g., 85-110 mesh) to allow the glitter particles to pass through easily.
Mixing:
- Mix the glitter paste thoroughly before use to ensure even distribution of glitter particles.
Printing Technique:
- Apply an even coat of glitter paste using a squeegee. Multiple passes might be necessary to achieve the desired opacity and glitter density.
- Use a heavier flood stroke to ensure the paste fills the screen openings adequately.
Curing:
- Cure the printed items properly, typically at a temperature and duration recommended by the glitter paste manufacturer, to ensure adhesion and durability.
Cleanup:
- Clean screens and tools promptly after use to prevent the glitter paste from hardening and becoming difficult to remove.
If you'd like to know more about this chemical or need any analysisreport regarding this chemical then contact us support@echem.com.bd
- Clean screens and tools promptly after use to prevent the glitter paste from hardening and becoming difficult to remove.
Technical Information
- Mix Ratio: 20% Glitter Flakes to 80% Base. (Percentage may vary to suit your needs).
- Screen Mesh: 24-32/inch (10T-13T cm) is recommended.
- Stencil: All types of stencils may be used for screen printing Glitter Flakes.
- Reducer: 502 Reducer (1-3%) can be added to the ink base.
- Ink Cleanup: Use Enviro Series 2000 Green or Enviro Series TR Blend.
- Direct Printing: To ensure good coverage flood your screen, two passes should be made applying medium squeegee pressure. Cure as you normally would. Glitter Chips reflect heat, make sure that your print is fully cured.
- Heat Transfers: Print on high gloss paper for glitter transfers and semi-cure in dryer. Cold peel at for 12 – 15 seconds.
Sprinkle Application: (Direct Printing) Screen print a plastisol base, such as our Jelly Print or Stone Print to your material (do not cure at this point). Glitter Flakes may be applied by sprinkling the chips onto the wet ink design and gently brushing or tapping off the excess flakes. You may also apply the chips to your wet design by putting a layer of glitter flakes in a large enough container then gently pressing or dipping the image directly onto the glitter flakes. Brush or tap off excess flakes. Fully cure as you normally would.
Colors Available for Glitter Flakes
- Colors (.008 x .008): Electric Green (laser), Fire and Ice (laser), Gold Dust (laser), Gold Glitter, Ice Blue (laser), Ice Wine (laser), Silver Glitter, Techno Silver (laser), Crystallina
- Colors (.004 x .004): Metallic Silver Sparkle, Metallic Gold Sparkle, Metallic Copper Sparkle, Metallic Red Sparkle, Metallic Royal Sparkle, Metallic Purple Sparkle, Metallic Green Sparkle.
Ratings & Reviews
0.0
No Review Found.
Sold By
echem
469
Total Item
Login To Comment