Categories

Analog Oscilloscope LODESATAR MOS-620CH 20MHz DUAL Channel

  • 50 In Stock

  • 0 Review(s)

Price :

৳53000

Estimated Shipping Time: 5 days

Product SKU: B8I1275Cxz

Report This Item


Analog Oscilloscope LODESTAR MOS-620CH

Quick Details

Place of Origin:

China

Brand Name:

 LODESTAR

Type:

Analog Oscilloscope

Model Number:

620CH

Specifications

  • Build-in 6 Digit Frequency Counter
  •   20MHz/40MHz/50MHz Dual Channel
  • 10 times sweep magnification
  • TV Synchronization, X-Y mod
  • High luminance, internal graticule CRT
  • Japanese electronic encoder, light, handy and reliable
  • Fully sealed long live vertical mode switch
  • ALT Triggering Function. Two independent signals
  • simultaneous observation
  • Build-in 6 Digit Frequency Counter
  • 20MHz/40MHz/50MHz Dual Channel
  • 10 times sweep magnification
  • TV Synchronization-Y mode



If you'd like to know more about this chemical or need any analysis report regarding this chemical then contact us support@echem.com.bd


Horizontal System

  • Sweep time: 0.2uSec~0.5Sec/DIV,20steps in 1-2-5 sequence;
  • Sweep time accuracy:±3%
  • Vernier sweep time control:≤1/2.5 of panel-indicated and #118alue;
  • Sweep magnification: 10 times;
  • ×10MAG sweep time accuracy: ±5% (20nSec~50nSec are uncalibrated);
  • Linearity:±5%,×10MAG: ±10% (0.2s~1us)
  • Position shift caused by ×10MAG: within 2DIV. At CRT screen center

    X-Y MODE:

    • Frequency bandwidth: DC to at least 500KHz;
    • X-Y phase difference:≤3°at DC~50KHz
    • Sensitivity: Same as the vertical axis. (X-axis: CH1 input signal; Y-axis: CH2 input signal.);

    CALIBRATION VOLTAGE
      • Waveform: Positive-going square wave;
      • Frequency: Approx. 1KHz;
      • Duty ratio: Within 48:52;
      • Output voltage: 2Vp-p±2%;
      • Output impedance: Approx.1KΩ

         CALIBRATION SIGNAL 

        • Waveform: Positive-going square wave;
        • Frequency: Approx. 1KHz;
        • Duty ratio: Within 48:52;
        • Output voltage: 2Vp-p±2%;
        • Output impedance: Approx.1KΩ

           CRT
          • Type: 6-inch rectangular type, internal graticule;
          • Phosphor:P31;
          • Acceleration voltage: Approx.2KV(20MHz)/Approx.12kv(40MHz);
          • Effective screen size:8×10DIV[1DIV=10mm(0.39in)];
          • Graticule: Internal;
          • Trace rotation: Provided

            VERTICAL AXIS

            • Sensitivity:5mV~5V/DIV,10 steps in 1-2-5sequence
            • Sensitivity accuracy:≤3%
            • Vernier vertical sensitivity: Continuously variable to 1/2.5 or less of panel-indicated and #118alue Frequency
            • bandwidth: DC~20MHz(x5MAG: DC~7MHz)/DC~40MHz(x5MAG: DC~15MHz)DC~50MHz(X5MAG: DC~15MHz)
            • AC coupling: Low limit frequency 10Hz. (With reference to 100KHz, 8DIV, Frequency response with-3dB.)
            • Rise time: Approx.17.5ns (x5 MAG: Approx.50nS) Approx.8.75ns (x5 MAG: Approx.25nS)
            • Approx.7ns (x5 MAG: Approx.23.3nS)
            • Input impedance: Approx.1MΩ/Approx.25pF
            • DC balance shift: 5mV~5V/DIV: ±0.5DIV, 1mV~2mV/DIV ±2.0DIV
            • Linearity:<±0.1DIV of amplitude change when the waveform of 2DIV at graticule center is moved vertically
            • vertical modes: CH1 single channel; CH2 single channel; DUAL: CH1 and CH2 are displayed
            • Simultaneously. ALT or CHOP selectable at any sweep rate; ADD: CH1 CH2 algebraic addition
            • Chopping repetition frequency: Approx. 250KHz
            • Input coupling: AC, GND,  DC
            • Maximum input voltage: 300Vpeak (AC: frequency 1KHz or lower);
            • common-mode rejection ratio: 50:1 or better at 50KHz sinusoidal wave.
            • (When sensitivities of Ch1 and Ch2 are set equally)
            • Isolation between channels (At 5mV/DIV range): >1000:1 at 50KHz; >30:1 at 15MHz/>30:1 at 35MHz/>30:1 at 45MHz
            • CH2 INV BAL: Balanced point variation:≤1DIV (Reference at center graticule)

              TRIGGERING

              • Triggering source: CH1,CH2,LINE,EXT
              • Coupling: AC: 20Hz to full bandwidth
              • SLOPE: /-
              • Sensitivity: 20Hz~2MHz:1DIV, TRIG-ALT:2DIV EXT:200mV;TRIG-ALT:3DIV,EXT:800mV;
              • 2~20MHz:1.5DIV;20MHz~40MHz:2.5DIV;40MHz~50MHz:3DIV;
              • TV: Sync pulse more than 1 DIV (EXT:1V)
              • Triggering modes: AUTO; NORM: TV-V: TV-H: (Both TV-V and TV-H synchronize only when the synchronizing signal is negative)
              • EXT triggering signal input: Input impedance/: Approx:1MΩ/approx.25pF;
              • Max. input voltage:300V (DC AC peak), AC: Frequency not higher than 1KHz

              Ratings & Reviews

              0.0

              No Review Found.


              To Review


              To Comment


              Sold By

              DISCOVERY LAB

              1047

              Total Item
              Visit Store

              Seller's Products

              Related Products

              ৳200000

              Portable Flash Cure Units

              ৳18900

              Compact Bagless Vacuum Black+Decker Brand

              ৳45000

              Drill machine

              ৳1950

              Knapsack Pressure Sprayer

              ৳3000

              Backpack Hand Sprayer Machine 18 Liter

              ৳2200

              Paint Zoom Electric Paint Sprayer

              ৳21990

              PD-I Laser Range Meter

              ৳950

              Medi Gloves Nitrile Hand Gloves – Powder Free